Features:
1. Discharge and recharge
2. Anti-slip design, the phone will not fall
3. Sensitive, it can be charged without disassembling the phone case
4. Multiple protections, safer to use
5. Both Android and IOS devices that support QI are available

Product specifications:
1. Input: DC 5A-1500mA
2. Output: DC 5A-1A
3. Charging distance: 2-5mm
4. Diameter: 69mm
5. Thickness: 9mm
6. Net weight: 50g

Packing list:
Micro USB charging cable x 1
Wireless charger x 1
Operation manual x 1

Note:
IOS devices or Android devices without a wireless charging receiver need to be equipped with a protective cover/wireless charging receiver that supports QI to use, and a protective cover/wireless charging receiver that supports QI must be purchased separately by yourself

1. Independent coils, do not interfere with each other when charging.
2. Automatic power failure after filling to prevent over-charge from damaging the cell phone battery.
3. Compatible with QI standard phone, iWatch and AirPods.
4. Output for phone: 5W / 7.5W / 10W
5. Size: 19.2x10x6.2cm
5. Weight: 150g

1. Support three devices charging at the same time.
2. Metal foreign object detection and protection to prevent loss.
3. 8 Pin and Micro USB two-in-one connector, suitable for Apple AirPods and some TWS Bluetooth headset boxes.
4. Magnetic adsorption, the mobile phone / watch can be fixed in the charging area without falling.
5. The mobile phone can be placed horizontally or vertically while charging, without delay in watching dramas and charging.
6. The full circle of light rings is cool and intelligently indicates the charging status.
7. Touch-sensitive on / off lights.
8. Multiple protection, safer charging.
9. Cooling hole design, low temperature and high efficiency.
10. Non-slip silicone pad, more stable.
11. Strong compatibility.

Product parameters:
1. Input: 12V / 2A or 9V / 2.7A.
2. Mobile phone output: 15W / 10W / 7.5W / 5W.
3. Watch output: 2.5W.
4. Headphone output: 2W (AirPods).
5. Input interface: Type-C interface.
6. Transmission distance: less than or equal to 8mm.
7. Conversion rate: greater than or equal to 73%.
8. Product size: 136x101x136mm.

1. Mini compact design, luxurious surface, fully demonstrate the accurate combination of beauty and technology.
2. Fully prevent overcharge, over current, over voltage and high temperature.
3. Simple design, compact and lightweight
4. Packing size: 12.5x12.5x2cm
5. Package weight: 105g

1. Fast charging speed, charge output up to 1.5A
2. Low temperature, high efficient driver design
3. Safe, built-in over-voltage, under-voltage, short-circuit protection
4. Charger efficience: >73%
5. Transmission distance: <8mm

1. Adopt high quality frosted materials, durable and firm.
2. Support temperature control, overcurrent protection and overvoltage protection.
3. Put down your phones on the wireless charger, achieve charging.
4. Compatible with most QI standard phones, like iPhone X & 8 & 8 Plus, Galaxy S8 & S8 +, Huawei, Xiaomi, LG, Nokia, Google and Other Smart Phones.
5. Receiving distance: 4-10mm.

1. Support iPhone, Galaxy, Huawei, Xiaomi, LG, HTC and Other QI Standard Smart Phones.
2. Mini compact design, luxury surface, show the combination of beauty and technology fully.
3. Fully protected against overcharge, overcurrent, overvoltage, and high temperature.
4. Slim body, less heat, cooler and more efficient charging.

Features:
1. Magnetic design, charge when you put it down
2. 10W wireless fast charging
3. The screw + paste is installed on the bottom of the desktop, wireless charging is carried out in the air, and the induction is sensitive
4. Suitable for a variety of desktops with a thickness of 30mm
5. Concealed, water-repellent, dust-proof and oil-proof

Specifications:
1. Wireless output: 5W/7.5W/10W
2. Input: 24V/1.5A
3. USB output: 5V/2A
4. Sensing distance: 15-30mm
5. Material: ABS+PC
6. Product weight: 159g
7. Product size: 120x116x21mm

1. 6 in 1 wireless charger stand. The multi-function charger bracket with iPhone/Micro/Type-C interface can charge almost all mobile devices, such as iPhone, iPad, Samsung, LG, HTC, Huawei, Sony and the charging coaxial can rotate 360 degrees freely at the same time To charge 4 devices, QC2.0/3.0 adapter is required
2. Suitable for iWatch series 4/3/2/1, Airpods and iPhone Xs/Xs Max/Xr/X/8/8 Plus/Samsung Galaxy S10/S10 Plus/ S9/S9 Plus/S8/S8 Plus/S7/ S7 Edge / S6 Edge Plus / Note 9 / Note 8.
3. Charge forward. The charging station adopts advanced automatic control technology. Built-in protection measures can prevent overcharge, overcurrent and overvoltage protection, temperature control, and foreign body detection. Protect your device battery from damage caused by overcharge.
4. Stable quality. Innovative silicone material, will not scratch iPhone / iWatch / Airpods, will not appear on the screen or edges. Decorate your bedroom, study, hall, place.
5. Easy installation. Just install the original iwatch charger into the stand, and since there is another connector built in, it can be used as your charging stand. Hidden long excess cables to make the can or bedside table neat and orderly.

Parameter:
1. Material and process: ABS+PC (fireproof material) black rubber oil spray, color spray metal oil
2. Product net weight: 208g
3. Product gross weight: 248g
4. Product input: DC5v-3.1A 9V-2A(MAX)
5. Base charging output: DC5V-1A
6. ForAirPods output: 3W
7. Foriwatch output: 2W
8. Wireless charging output: 10W
9. USB cable length: 1.2 meters
10. Product size: 23x9x12.5cm

Product name: Split 3 in 1 fast wireless charger
Model: N35
Color: black and white
Solution: ST
Input: 5V/2A 9V/2A
Wireless output: 5w-7.5w-10w
Headphone output: 3W
USB output: 5V/1A
Material: ABS.
Induction distance: 2-6mm
Operating frequency: 110-205khz
Net weight: 180g
Product size: 190x83x139mm

1. Product model: KD-1
2. Input: 5V2A 9V2A
3. Unlimited output: 10W
4. Transmission distance: 2-10mm
5. Charging frequency: 100-205KHz
6. Product size: 10x10x0.67cm
7. Packing size: 15x10x2cm

1. Charge as you go, the device can be placed horizontally or vertically
2. Suitable for charging mobile phones & Apple Watch & AirPods 1 / 2 / Pro at the same time
3. 25W high power fast charging
4. Intelligent current matching; metal foreign object detection and protection
5. Sensitive and can be charged even with a mobile phone case
6. Touch-controlled LED light, the light is soft and non-glaring, allowing you to see the charging status at a glance
7. Multiple protections, safer to use
8. The compact charging stand can place all devices in one place, no need to plug in multiple chargers, and the cables are not cluttered, practical and convenient
9. Can be widely used indoors, such as homes, offices, hotels, restaurants and bars, etc.

Product specifications:
1. Mobile phone output power: 25W/15W/10W/7.5W/5W
2. Watch output power: 3W
3. Headphone output power: 5W
4. Input voltage/current: 9V 4A, 12V 2.5A
5. Input interface: Type-C
6. Sensing distance: less than 5mm
7. Material: plastic plating + complete machine oil injection process
8. Base size: 140x140mm

1. Universal input: 5V 2A; output: 5V 1A
2. Fast charge input: 9V 2A; output: 9V 1.2A
3. Induction distance: less than or equal to 8mm
4. Size: 105x105x20mm
5. Discharge and recharge
6. Compatible with a variety of mobile phones that support QI charging standards
7. Small size, no space, easy to carry
8. Metal shell, sturdy and durable
9. Delivery of Mirco USB charging cable

1. Universal input: 5V 2A; output: 5V 1A
2. Fast charge input: 9V 2A; output: 9V 1.2A
3. Induction distance: less than or equal to 8mm
4. Size: 105x105x20mm
5. Discharge and recharge
6. Compatible with a variety of mobile phones that support QI charging standards
7. Small size, no space, easy to carry
8. Plastic shell, sturdy and durable
9. Delivery of Mirco USB charging cable

1. Input voltage/current: 5V-2A, 9V-1.8A
2. Output power: 10W
3. Charging frequency: 110-205 KHZ
4. Charging distance: less than or equal to 8MM
5. Charging cable length: 1.5M
6. Use model: mobile phone (mobile phone with wireless charging function or wearing wireless charging receiver)
7. Upgraded battery sensing technology, fast charging, efficiency comparable to the original
8. The charging process is not hot and the temperature is low enough to be manually detected
9. The phone case can also be charged normally without affecting the charging speed (note: the thickness of the phone case cannot exceed 6mm)

1. Metal texture, small size, stylish appearance
2. The special ceramic refrigeration panel can quickly cool down after power on, and the panel temperature can be reduced to an ice-cold state when the temperature is low
3. Built-in magnetic steel ring, suitable for iPhone 12 and other models automatic adsorption
4. 15W fast charge, enjoy super fast charging, mobile phone charging and cooling down can kill two birds with one stone
5. Suitable for long-term mobile phone application scenarios such as Internet celebrity live broadcast, mobile game, and drama chasing

1. The device can be placed horizontally or vertically
2. Suitable for simultaneous charging of mobile phones & Apple Watches & AirPods 1/2 / Pro
3. 15W high power fast charging
4. Intelligent matching current; metal foreign body detection and protection
5. Sensitive, it can be charged even with a mobile phone case
6. Multiple protections, safer to use
7. Support 15W, 10W and 7.5W wireless fast charging main mobile phone watch headset
8. The compact charging stand can place all the devices in one place, no need to insert multiple chargers, the cable is not messy, practical and convenient
9. Can be widely used indoors, such as homes, offices, hotels, restaurants and bars, etc.

Product specifications:
1. Mobile phone output power: 15W/10W/7.5W
2. Headphone/watch output power: 3W
3. Input voltage/current: 9V 3A, 9V 2A, 5V 3A
4. Input interface: Type-C
5. Sensing distance: less than 5mm
6. Material: ABS+PC
7. Dimensions: unfolded: 188x115x10.5mm, folded: 90x118x21mm

1. The device can be placed horizontally or vertically
2. Suitable for simultaneous charging of mobile phones & Apple Watches & AirPods 1/2 / Pro
3. 15W high power fast charging
4. Intelligent matching current; metal foreign body detection and protection
5. Sensitive, it can be charged even with a phone case
6. Touch the LED light, the light is soft and not dazzling
7. Multiple protection, safer to use
8. The compact charging stand can place all the devices in one place, no need to insert multiple chargers, the cable is not messy, practical and convenient
9. Can be widely used indoors, such as homes, offices, hotels, restaurants and bars, etc.

Product specifications:
1. Mobile phone output power: 15W/10W/7.5W/5W
2. Watch output power: 3W
3. Headphone output power: 2W
4. Input voltage/current: 9V 4A, 12V 2.5A
5. Input interface: Type-C
6. Sensing distance: less than 5mm
7. Material: ABS+Zinc Aluminum Alloy
8. Size: 17.5x12x8.5cm

Features:
1. It has two functions: wireless charger and mouse pad
2. The charging area is made of PU leather, and the charging logo indicates the charging location
3. The indicator light shows the charging status
4. QI standard, widely compatible with a variety of mobile phone models
5. The sensing distance is less than or equal to 6mm, and it can be charged without disassembling the phone case
6. Multiple protections, safe charging
7. The front of the mouse pad is made of fabric, which makes the operation smooth and smooth; the bottom is made of rubber, so the friction is not slippery
8. The mouse pad is waterproof, dirt-resistant, easy to clean, and can be bent at will

Product specifications:
1. Product standard: Qi standard
2. Power: 10W
3. Input voltage/current: 5V 2A / 9V 2A
4. Charging voltage/current: 5V 1A / 9V 1.2A
5. Charging frequency: 110-205KHz
6. Charging distance: less than or equal to 6mm
7. Charging efficiency: greater than or equal to 73%
8. Product weight: 192g
9. Product size: 26.2 x 19.8 x 0.65cm
10. Interface: Micro USB

Packing list:
Wireless charger mouse pad x 1
Manual x 1
Data cable x 1

1. Suitable for simultaneous charging of iPhone/watch/headphones
2. Requires QC2.0/3.0 adapter
3. The built-in protection measures can prevent overcharging, overcurrent and overvoltage protection, temperature control and foreign body detection, and protect the equipment battery from overcharging damage
4. Silicone material, will not scratch the device, will not block the screen or edges
5. Simple installation
6. Hidden cables keep the desk or bedside table in order

Note:
1. This watch wireless charging is only suitable for Apple Watch 1-5 generation, other watch models do not support wireless charging

Product parameters:
1. Input current: 9V-2A (please use QC3.0 fast charge, or 9V power supply)
2. Mobile phone wireless charging output: 5W/7.5W/10W Max
3. Headphone wireless charging output: 5W Max
4. Watch wireless charging output: 2W Max
5. Material: ABS+PC fireproof material
6. USB cable length: 1.1m
7. Product size: 180x98x87mm
8. Product weight: 240g

1. A variety of wireless charging devices compatible with PD/QC protocol, charging and charging
2. Provide 15W wireless output, fast charging
3. Magnetic positioning, automatic adsorption of mobile phones, stable adsorption, mobile phones will not fall
4. Anti-overcharge protection, no need to worry about overcharge and heat damage of the phone, safer to use
5. With Type-C fast charge output interface
6. Small size, easy to carry

Product parameters:
1. Material: Aluminum alloy
2. Input: 5V 3A, 9V 2.22A
3. Output: 5W/7.5W/10W/15W
4. Size: 6x6x0.9cm
5. Cable length: 1m

1. Support three devices charging at the same time.
2. Metal foreign object detection and protection to prevent loss.
3. 8 Pin and Micro USB two-in-one connector, suitable for Apple AirPods and some TWS Bluetooth headset boxes.
4. Magnetic adsorption, the mobile phone / watch can be fixed in the charging area without falling.
5. The mobile phone can be placed horizontally or vertically while charging, without delay in watching dramas and charging.
6. The full circle of light rings is cool and intelligently indicates the charging status.
7. Touch-sensitive on / off lights.
8. Multiple protection, safer charging.
9. Cooling hole design, low temperature and high efficiency.
10. Non-slip silicone pad, more stable.
11. Strong compatibility.

Product parameters:
1. Input: 12V-2A / 9V-2.7A / 9V-2A.
2. Mobile phone output: 15W / 10W / 7.5W / 5W.
3. Watch output: 2.5W.
4. Headphone output: 5W (AirPods).
5. Input interface: Type-C interface.
6. Transmission distance: less than or equal to 8mm.
7. Conversion rate: greater than or equal to 73%.
8. Product size: 136x101x136mm.

1. Support mobile phone 10W continuous fast charging
2. Support Qi wireless charging, 0.1 second response, charge when dropped
3. No radiation, low temperature charging will not be hot, intelligent temperature control, charging will not hurt the machine throughout the low temperature
4. Applicable to iPhone, Android, Type-C series
5. Input: 100-240V, 50/60Hz
6. Output: 5V/2A
7. Material: PC+ABS

1. Product model: KD-1
2. Input: 5V2A 9V2A
3. Unlimited output: 10W
4. Transmission distance: 2-10mm
5. Charging frequency: 100-205KHz
6. Product size: 10x10x0.67cm
7. Packing size: 15x10x2cm
8. Material: PVC/TPE plastic

1. Input:5V 2A
2. Output:5V 1.5A

Features:
1.Qi Standard Wireless Charger,Standby power consumption:>50mW
2.Aluminum alloy utra thin slim Wireless Charger
3.Over temperature protection: When charging temperature is higher than 60 degree automatically stop charging for 1 minute, wait for the temperature down and then recharge
4.Over-current protection: when the charging output current is greater than 1.5A is to automatically stop charging, to prevent damage to the charger.

1. Intelligently recognize voltage, auto-match the right voltage, give protection for your phone.
2. Charging while case on, no need to remove the phone case(<=8mm) before charging.
3. Large and independent coil, concentrated energy, filling faster.
4. Silicone material anti-slip pad, keep your phone secure and prevents sliding, charging more stable.