Parameter:
1. Input power: less than or equal to 3W
2. Input voltage: DC 5V
3. Charging time: about 3 hours
4. Size: 175x55x67mm
5. Weight: about 122g

Feature:
1. Three modes: deep cleansing, moisturizing introduction, lifting and firming
2. The silicone brush cleans the face deeply, effectively cleans the pores and massages the skin.
3. Shovel blackheads to remove acne, effectively remove oil on the face, and clean more thoroughly
4. Ultrasonic vibration can instantly remove acne in pores and remove it instantly. Ultrasonic vibration can atomize distilled water, remove and remove dust, cosmetics, etc., which can improve various skin problems in a short time.
5. EMS micro current activates cells, lifts and firmes, restores skin elasticity

Parameter
1. Power used: Max 8.5W
2. Charging current: 480mA
3. Battery capacity: 1000mAh
4. Charging time: 2.5 hours
5. Temperature range: 6-42 degrees Celsius (+/- 5 degrees Celsius)
6. Host size: 175x55x67mm net weight: 145g

Feature:
1. Alternate cold and heat, gentle heating at 42 Celsius helps to open pores and soften the stratum corneum of skin; refrigeration shrinks pores and locks in nutritional moisture
2. High-frequency vibration, which helps deep cleansing the skin, eliminates skin fatigue, and helps the skin to absorb skincare essence more deeply
3. Red and blue light and colorful light care to promote blood circulation and assist acne, acne and acne care.
4. EMS micro current activates cells and restores skin elasticity.
5. Make-up remover card with cotton pad and heat function to clean the face and make skin cleaner.

parameter
1. Power: about less than or equal to 8W
2. Vibration frequency: about 10000rpm
3. Working voltage: 7.4V
4. Material: ABS+PC+alloy
5. Charging time: about 2.5 hours Applicable time: about 50 minutes
3. Size: 191x52x46mm Net weight: 200g

feature:
1. Five modes: deep cleansing, introductory mode, nourishment of the bottom of the muscle, three-dimensional lifting EMS, red light muscle regeneration, ice compress to calm and soothe
2. High-pulse puncture quickly reaches the cortex without damaging nutrition, and is continuously effective. Ion vibration is exported, deep cleansing to export grease and dirt, keeping pores dry and clear. Ion vibration is introduced, deep into the bottom of the muscle, double the effect of reducing loss, and strengthen the bottom of the muscle
3. High radio frequency waves penetrate deep into the skin to reshape the youth. The special circular radio frequency care head can effectively control the heat energy and cover the skin in a wide range.
4. The make-up remover is attached to the cotton pad and the heat function is exported to clean the face and make the skin clean more thoroughly

1. Durable, environmentally friendly, non-hazardous
2. Elegant, highly textured, beautiful appearance, vivid image
3. Is a home decoration and a good gift for relatives and friends
4. Category: Resin Crafts
5. Styling: Beauty
6. Packaging: carton packaging
7. Size: 30x10x23.5cm

1. Main chip: Realtek8763EWE
2. Accelerometer: STK8321
3. PPG heart rate sensor: LC11S
4. Touch IC: 816D
5. Motor: flat motor
6. Display: 2.01 inch TFT square screen
7. Resolution: 240 x 296
8. Flash size: 128M
9. Bluetooth version: 5.2
10. Bluetooth antenna: FPC
11. Battery capacity: 270mAh
12. Use time: about 7 days
13. Standby: about 15 days
14. Charging: about 2h
15. Speaker: 1012 high-fidelity speaker
16. Charging method: magnetic cable charging
17. Supported languages: Chinese, English, German, Russian, Spanish, Portuguese, French, Japanese, Arabic, Dutch, Italian, Polish, Thai, Vietnamese, Finnish, Romanian, Turkish, Croatian, Czech, Malay, Greek
18. Health monitoring: heart rate detection, heart rate timing monitoring, blood pressure detection, blood pressure timing, blood oxygen detection, sleep monitoring
19. Standard functions: step calculation, exercise distance, calorie consumption, raise hand to light up the screen, turn wrist to light up the screen
20. Sports mode: support running, cycling, walking, gymnastics, ball games, mountaineering, yoga, swimming, etc.
21. Reminder function: alarm clock, sedentary, drinking water, incoming calls, text messages, WeChat, Skype, Whatsapp, Facebook, Messenger, etc.
22. Other functions: Bluetooth calls, direct dialing on the watch (must be connected to the mobile phone Bluetooth), music playback (must be connected to the mobile phone Bluetooth), stopwatch, timer, music control (connect to the APP, open the player on the mobile phone first), remote photography (connect to the APP, open in the APP), weather, breathing training, screen brightness adjustment, APP movement trajectory, find watch, find mobile phone, etc.
23. Waterproof level: IPX8
24. Middle frame material: metal
25. Surface shell material: glass
26. Wristband material: silicone/steel (double strap)
27. Strap: about 22cm long
28. Size: about 5.3 x 4 x 1.1cm
29. Weight: about 49g

1. Fabrics using the latest high-density face , fine workmanship , feel comfortable
2. Tying are tensile strength nylon rope , strong
3. Lightweight and convenient to carry or store
4. Distribution generous and beautiful bag easy to carry
5. Size: Approx 190x100cm (not include rope part)
6. Suitable for outdoor use. Perfect for backyard, camping, hunting, hiking, traveling, etc.

1. Faster and easier picking of blueberries, cranberries, myrtle, blackcurrants, etc., the metal comb makes the product have a longer service life.
2. Ergonomic handle: Reduces pressure on hands and wrists, allowing you to pick berries all day long. Convenient, safe and suitable for all ages.
3. Easy to clean: If the blueberry picker needs cleaning, just rinse it with water or put it in the dishwasher.
4. Environmentally friendly and effective: will not harm plants, protect your hands from any thorns or sharp branches. The plant's berries are removed without tearing the leaves, food-safe and BPA-free.
5. Material: plastic shell/full metal bottom
6. Weight: 0.37kg
7. Dimensions: 22 x 14 x 7.5cm

1. With it distinctive design, the Bluedio US builds its high-strength from an aluminum alloy for its main frame, which makes it lightweight and durable. The unique appearance reminds you of an UFO and will create interest at first sight.
2. The 2.1 sound track employs a 59mm bass driver and is designed to improve and strengthen low frequencies. The other two speakers can now concentrate on reproducing the mid and high tones. Music will be brilliantly rendered.
3. 3D sound: When you are watching movies or enjoying music, simply turn on the 3D sound and it will amplify the sound field and optimize the bass to bring you the experience of a home theater system.
4. Passive radiator: The specially designed passive radiator will assist the 59mm bass driver to effectively enhance bass performance. It sounds strong and powerful.
5. Control buttons: All 4 buttons are located on the top of the Bluedio US. Each key cap are separated by appropriate space to ensure you can accurately control your music .

1. Two SATA hard disks support serial hard disks, which can be displayed when connected to a computer
2. When offline, press and hold the copy button for 3 seconds to clone drive A to drive B
3. Metal shell has faster thermal conductivity
4. The capacity of a single hard disk is up to 6TB, and the total capacity is up to 12TB
5. Power interface: DC-3A/12V
6. Support hard disk: HDD/SDD3.5/2.5 inch SATA hard disk
7. Size: 134x115x72mm

1）Support A2DP, AVRCP, Headset, Handfree profile

2) Output power: 3W

3) SNR: >=95dB

4) Frequency response: 280Hz-16KHz

5) Speaker drivers: 4 ohms

6) Built-in Rechargeable Battery, 520mAh

7) Bluetooth version: V2.1

8) Working distance: 10m

9) Speaker: 45mm

10) Support TF card

11) Working time: 5 hours

12) Size: 60 x 60 x 50mm

1. A perfect keyboard for your beloved PS4
2. This product is suitable for PS4 controller. PS4 controller wireless keyboard makes it easier for the players to chat with friends and relatives in PS4&PS vita platform.
3. To communicate with your friends conveniently by the voice chat and typing with this wireless controller.
4. Fit well with your PS4 controller ,install and take out simply.
5. Easy to operate, good hand feeling.
6. The original style of the PS4 controller will not be destroyed when the wireless keyboard if fit on.
7. This wireless keyboard would be embedded perfectly with the PS4 controller.

Product description:
TX16 is a 3.5mm Bluetooth transmitter-receiver Bluetooth adapter with optical fiber and one for two. It can connect two devices at the same time. When it is used as a Bluetooth transmitter, it can connect mobile phones, walkmans, and televisions. , The music on the computer and other devices is transmitted wirelessly to your Bluetooth receiver, stereo Bluetooth headset, Bluetooth speaker and other devices.
When it is used as a receiver, it can be used as a Bluetooth stereo headset (you only need to insert the headphone cable into the 3.5mm interface) or connected to speakers and amplifiers through audio cables to realize wireless Bluetooth transmission and playback of audio signals from mobile phones or computers.
The product adopts CSR5.0 module design. The high-end integrated chip has the characteristics of good sound quality and low power consumption; it integrates the function of Bluetooth audio transmission one for two, compatible with all electronic products on the market. And solves such as XOBX game console- PS4-Smart TV and other products only have the problem of optical fiber output.
Note: Please fully charge it before using TX6.


Specifications:
Product name: TX16
Bluetooth version: V4.1, Class II
Bluetooth chip: CSR BC8670
Frequency range: 2.402GHZ-2.480GHZ
Bluetooth protocol: RX: A2DP AVRCP TX: A2DP
Transmission mode: support (connect two Bluetooth speakers or earphones at the same time, use a CODEC at the same time)
Receiving mode: support (one for two functions, even two mobile phones)
CODEC: Sort TX: Respectively: First APT-X, Second: SBC, Third: APTX-LL, Fourth: FastStream RX: SBC
Note for APTX use: APT-X 48KHZ codec is first supported in single connection (headphones or speakers must also support APT-X) If it is dual connection, SBC CODEC will be automatically switched.
Battery specification: 350MA rechargeable lithium battery
Charging power supply: 110-240V AC Adapter 5VDC "300ma
Working temperature: -10a??55 degrees
Working hours: AUX: 15 hours SPDIF: 12 hours
Product size: 60x60x20mm

1. Device identification: I-WAVE
2. Bluetooth version: V2.1+EDR
3. Bluetooth protocol: 5.1
4. Support protocol: A2DP&AVRCP
5. Frequency range: 2.4Ghz-2.4835Ghz
6. Interface: standard for iPod 30pin interface
7. Bluetooth distance: 10 meters
8. Net weight: 10 grams
9. Easy to operate, insert the speaker 30-PIN
10. Super long transmission distance, the effective range is not less than 10 meters
11. The two indicators flash alternately when not connected, and the blue light flashes slowly after connection
12. Support Lingo protocol and device authentication
13. Support automatic identification of certified and non-certified basic audio
14. Bluetooth Music Streaming Media Adapter for 30 Pin Music Docking Station
15. The appearance is small and elegant, the overall appearance is just a simple black square
16. Users can sit 10 meters away and easily wirelessly transfer, play and control all audio files in your for iPhone, for iTouch or Bluetooth devices via Bluetooth
17. The standard 30PIN line output port can be directly connected to the for Apple dock or the for Apple audio line input port, and the output level can reach full power output without additional line amplification
18. Through the connection and disconnection of different transmitting devices, the audio source switching function without wiring and zero plugging can be realized, which saves the trouble of plugging and unplugging cables for traditional audio devices to switch audio sources
19. Turn on the speaker, insert the product into the docking station, and the front and rear LED lights start to flash quickly, indicating that the device has entered the pairing mode, indicating that the device is working normally. Since the machine is automatically reconnected by default, please turn it on for 30 seconds before pairing the Bluetooth device
20. After the device enters the pairing mode, turn on the Bluetooth function of the computer, mobile phone and other digital products with Bluetooth output function, search or find the Bluetooth device, and find the Bluetooth device of I-WAVE to connect
21. After the pairing is successful, the front and rear Bluetooth lights will flash slowly, indicating that the connection is successful and music can be played wirelessly
22. During normal operation, if you want to change the playback device, you need to disconnect the connected Bluetooth output devices such as computers and mobile phones, and then pair and connect with other Bluetooth devices. If you can’t connect, please take out the product and reinsert it

1. Bluetooth 5.1 chip, intelligent noise reduction, high-definition call.
2. The treble is bright, the midrange is real, and the bass is strong, giving you a shocking experience.
3. Three-key line control, switching only takes a moment.
4. 100mAh battery, low power consumption, long battery life, to meet your outdoor needs.
5. Suitable for various environments, easy to deal with rain/sweat, running/fitness
You can bring it.
6. The design of 360-degree azimuth fits the inclined surface of the ears, which is comfortable to wear and painless after long-term wear.
7. Intelligent magnetic attraction, anti-winding and anti-loss.

Product parameters:
1. Bluetooth version: 5.1.
2. Drive unit: Graphene 10mm speaker.
3. Impedance value: 16 ohms.
4. Sensitivity: 92dB.
5. Frequency range: 16Hz-25KHz.
6. The weight of a single headset: 9.2g.
7. Battery capacity: 100mAh.
8. Standby time: about 10 hours.
9. Sound effect: 4D.

Features:
1. No need for driver plug and play: multiple interface designs to meet various needs, allowing old devices to easily have Bluetooth
2. Better connection effect of multi-device expansion port: Bluetooth audio receiving mode, 3.5mm AUX/coaxial/optical audio output, multi-device expansion port, let you feel better connection effect.
3. Upgrade Bluetooth speakers: connect old speakers or power amplifiers with 3.5mm AUX/coaxial/optical fiber interfaces and fiber optic coaxial interfaces to solve the problem that the speakers cannot use Bluetooth to play without Bluetooth
4. Support a variety of power amplifiers: Compatible with various old-fashioned power amplifiers, strong signal without delay, APTX-HD high-fidelity, enjoy CD-level sound quality
5. Support APTX-HD low latency + high restoration: High-fidelity APTX-HD allows Bluetooth to have CD-level sound quality HiFi shocking lossless sound quality, high-fidelity audio data restoration. Let the wireless connection enjoy the wired connection sound quality experience
6. Long battery life experience with large-capacity lithium battery: 500mAh large-capacity lithium battery, battery life can reach 10 hours
7. CD lossless sound quality APTX-HD high-definition decoding: APTX-HD decoding technology allows Bluetooth to have CD-level sound quality and enjoy lossless shocking sound quality
8. Bluetooth 5.2 chip music starts from the core Bluetooth 5.2 chip, the signal transmission is stable, low delay + high restoration, so that the audio signal can be transmitted wirelessly
9. With antenna, long distance, stable transmission 15M barrier-free transmission and reception without pressure

Parameter:
1. Bluetooth version: Qualcomm Bluetooth V5.2
2. Material: aluminum alloy
3. Interface: 3.5mm AUX/coaxial/optical (Note: only one interface output is supported, three interfaces do not support simultaneous audio output)
4. Transmission distance: about 15M
5. Charging type: Type-C/built-in lithium battery
6. Battery capacity: 500mAh
7. Working time: about 10 hours
8. Audio codec: APTX/APTX-HD/SBC/AAC
9. Range: 2400MHz-2483.5Mhz
10. Frequency response: 20Hz-20kHz
11. Dimensions: 73 x 70 x 20mm
12. Gross weight: 138 grams
13. Note: 3.5 AUX, RCA, coaxial, optical fiber audio cables are not included in the package, if necessary, please contact customer service

Parts List:
-1 x Bluetooth audio receiver
-1 x Charging cable
-1 x User manual

1. Sound channel system: wireless stereo
2. Control mode touch mode
3. Waterproof rating: IPX4
4. Bluetooth program: Jelly AC7003F4
5. Bluetooth version: V5.3
6. Support Bluetooth protocol: HFP, A2DP, AVRCP, HSP, BR+EDR+BLE
7. Bluetooth operating frequency: 2.4GHZ-2.4835GHZ ISM Band
8. Bluetooth effective distance: about 10m
9. Speaker power: 1.2W
10. Headphone amplifier type: ANT8112 Class D amplifier
11. Frequency response: 20-20000Hz
12. Speaker unit: 8 Europe electric 0916 speakers
13. Microphone: electret condenser microphone
14. Built-in battery: lithium-ion polymer battery 3.7V 80mAh
15. Charging current: 60mA
16. Charging port: Type-C/USB-C
17. Charging time: about 2h
18. Use time: about 2.4-3h
19. Standby time: about 6 months
20. Saturation voltage: 4.2V
21. Over discharge protection: 3.3V
22. Weight: about 30g

Features:
1. HD anti-UV lenses, clearer vision, high-definition vision, anti-UV, strong and unbreakable, eliminating glare
2. Lightweight frame, comfortable to wear, long wear without pain
3. One-piece nosepiece design, fit the nose shape, reduce indentation
4. Bluetooth 5.3 stereo sound, stable performance, strong compatibility, stronger function, high-definition call sound quality
5. Dual speakers, directional sound, maintain privacy, accurate sound into the ear
6. Touch connection, multi-functional and convenient operation
7. Hinges adjustable, not pinching face
8. Curved mirror legs, not easy to slip
9. IPX4 level waterproof, easy to deal with various situations
10. Type-C/USB-C charging interface, convenient and quick

1. Material: ABS
2. Version: BT5.4
3. Distance: about 10 meters
4. Use with AUX audio equipment to eliminate the noise generated by the common ground of the vehicle equipment
5. Connect the 3.5mm audio interface, and the speaker without Bluetooth function can also play wirelessly
6. The car audio becomes a Bluetooth audio in seconds, wireless link playback, the audio is smooth and the mobile phone music, voice calls, and high-definition navigation playback are safer
7. Plug and play, no need to set up, just plug in the 3.5MM interface and use it
8. Eliminate all kinds of current noise, improve the current noise generated by the common ground of the playback device and the audio, restore the sound quality, and enjoy the pure original sound
9. Size: 32x66x16mm

Packing list:
- Bluetooth 5.4 audio adapter
- Instruction manual
- 3.5mm audio cable
- Type c power supply cable

• 3D Glasses Type:Shutter
• Gesture Recognition:No
• Model Number:G15-BT
• Display Number:None
• Controllers:No
• Compatible Device:No
• Brand Name:LESHP
• Viewing Experience:Immersive
• Sensor Type:no
• Type:Binocular
• Package:Yes
• All-in-one Virtual Reality Glasses:No
• Bundle:Bundle 1
• Glasses Type:3D Glasses

1. Input interface: USB
2. Bluetooth version: Bluetooth 2.1+EDR
3. Transmission distance: 10 meters in unobstructed area
4. Frequency range: 2.402GHZ-2.480GHZ
5. Support protocol: aptx-LL, SBC, A2DP, AVRCP, AFH, HFP, HSP
6. Indicator light: blue
7. Weight: 36 grams
8. Dimensions: 10.5 x 8 x 2.1 cm

Features:
1. Bluetooth 5.0 adapter: strong compatibility, suitable for TV, computer, headset, mouse, keyboard and other universal, can be used in home audio and video, cars and offices and other venues
2. Bluetooth 5.0 + EDR: more compatible, more stable signal transmission, 10 meters barrier-free transmission
3. Two-in-one transmission and reception: one adapter dual mode, at the same time to meet the transmission and reception functions
4. Free driver: plug and play, install driver for free, quick pairing, easy to use
5. Small size, easy to carry

Product parameters:
1. Weight: 5g
2. Interface: 3.5mm AUX
3. Dimensions: about 32 x 18 x 10.2 mm
4. Transmission rate: 25Mbps
5. Working frequency: 24MHz
6. Effective working radius: 10m

Packing list:
USB Bluetooth audio transmitter x 1
3.5mm AUX audio cable x 1

1. Headphone battery capacity: 120mAh
2. Bluetooth version: 5.2
3. Speaker: F10
4. Transmission distance: about 15 meters
5. Music playback time: about 20 hours
6. Talk time: about 20 hours
7. Charging time: about 1 hour
8. Charging port: Micro USB
9. Frequency: 20Hz-20KHz
10. Impedance: 32 ohms
11. Sensitivity: 85dB/mW
12. Packing list: earphone x1, charging cable x1, manual x1, ear cap x1
13. Weight: about 13.8g
14. Size: about 5.2 x 5 x 2.2cm

Features:
1. LED intelligent digital display, which can display the power
2. IPX7 waterproof, fully enclosed sound chamber to prevent the infiltration of daily sweat and rain
3. Anti-shedding soft rubber ear hooks, comfortable to wear, can be worn on both left and right ears
4. High-definition voice calls, can be answered by voice control, Yes to answer/No to reject
5. 12mm large diaphragm, balanced adjustment technology, clear layers and rich details
6. Bluetooth 5.2 version, widely compatible with various mobile phones and systems

1. Bluetooth version: 5.1
2. Screen resolution: 360 x 360
3. Battery capacity: 220mAh
4. Charging method: magnetic
5. Battery voltage: 3.7V
6. Power supply: 5V 1A
7. Memory: 128MB
8. Screen size: 1.32-inch IPS
9. Waterproof level: daily waterproof
10. Case material: titanium alloy

Functions:
1. Bluetooth call: answer/reject call, make call
2. Exercise: multiple exercise modes, exercise pedometer/calorie consumption/exercise record/exercise time
3. Health monitoring: heart rate, blood pressure, blood oxygen, sleep monitoring
4. Information push: SMS, QQ, WeChat, Skype, Facebook, Twitter, Line, WhatsApp, other (push mobile phone prompt information)
5. Other functions: voice assistant, band language switching, dial selection, music control, remote photography, call reminder, raise your hand to light up the screen, weather display, time display, stopwatch, clock, find bracelet, find mobile phone, etc.
6. Supported languages: English, Chinese, German, French, Italian, Spanish, Japanese, Polish, Russian, Portuguese, Arabic, Hebrew

1. Material: shell plastic
2. Bluetooth protocol: A2DP, HSP, HFP
3. Interface: USB 2.0
4. Output power: 0 ~ +4dBm
5. Receiving sensitivity: -75dB
6. Transmission distance: 10 meters
7. Frequency band: 2.4G ISM band
8. Connection method: Piconet / Scatternet Support
9. Audio decoding: 16bit codec
10. Working voltage: 5V
11. Packing list: receiver x1, wheat x1