1. The silicone material is comfortable, wear-resistant, non-toxic, and has a long service life.
2. Sweat-proof, scratch-resistant and washable.
3. Unique design, suitable for your equipment and easy to carry.
4. Convenience: You can quickly install and charge without removing the shell. The protective cover will not affect the touch screen and shield the signal.
5. For AirPods Pro / AirTag

1. Material: 304 stainless steel + PP
2. Chopsticks size: length 18.2cm
3. Spoon size: 19x4cm
4. Cutlery box size: 20x3cm
5. Configure tableware box, more convenient to carry
6. Frosted texture, better feel

Charger parameters:
1. Total power: PD 18W
2. Input voltage: AC 100-240V; 50/60Hz; 0.5A
3. Total output current: 3A
4. Output: DC5V 3A, DC9V/2A

Data cable parameters:
1. Support 3A fast charge
2. With high-power charging head, it can support 5V/9V/12V/15V/20.3V

Features:
Compatible with all mobile phones, tablets and laptops with Type-C interface; supports fast charging protocol; compact and portable; built-in PD chip, automatically matches the current required by the charging device, without losing the battery due to excessive current, smart charging is safer; Wide range of application and powerful functions.

Charging head parameters:
1. Total power: support PD 18W
2. Input voltage: AC 100-240V; 50/60Hz; 0.5A
3. Total current output of charging head: 3A
4. Output: DC 5V 3A, DC9V/2A

Charging cable parameters:
1. Support 3A fast charge
2. With high-power charging head, it can support 5V/9V/12V/15V/20.3V

Features:
Compatible with all mobile phones, tablets and laptops with Type-c interface. Support fast charging protocol, fast charging. Small and portable

1. Material: Silicone
2. Made of high-quality silicone material, scratch-resistant, non-slip, soft and durable
3. Small and light, easy to carry
4. Cable hole design, used to store and organize the charging cable
5. One thing is multi-purpose, not only a charging base, but also a mobile phone holder
6. A variety of colors, you can choose according to your preferences
7. Dimensions: 6.7 x 7.1 x 8.3 cm
8. Note: Only the bracket is shipped, no others!

1. 색상: ABS 블랙, 브러시드 메탈 표면
2. 적용 대상: 개
3. 수신기 충전식 리튬 배터리: 400mAh
4. 송신기 충전식 리튬 배터리: 2500mAh
5. 지능형 2-in-1 전자 무선 울타리 개 훈련기: 독특한 디자인, 편안한 그립감, 개 훈련기와 무선 전자 울타리를 하나로 결합, 간단한 조작, 편리한 모드 전환, 반려동물의 안전을 더 잘 보호할 수 있을 뿐만 아니라 제한된 범위 내에서 더 나은 훈련도 가능합니다
6. 구성품: 무선 송신기 x 1, 목걸이 수신기 x 1, 조절 가능한 TPU 스트랩 x 1, 5V / 1A 충전기 x 1, 금속 접촉 프로브 x 4, 테스트 라이트 x 1, 영어 설명서 x 1
7. 특징: 2-in-1 기능; LED 디스플레이, 반려동물 무선 울타리 & 원격 소리 진동 전기 충격 훈련기; LED 디스플레이 5가지 제어 반경 거리; 30단계 = 30미터, 60단계 = 60미터, 90단계 = 90미터, 150단계 = 150미터, 300단계 = 300미터

무선 울타리 모드에서:
1. 송신기와 수신기는 코드를 사용할 필요 없으며, 전원을 켜면 신호를 받을 수 있습니다;
2. 하나의 송신기가 여러 수신기를 지원합니다

원격 개 훈련 모드에서:
1. 코드를 사용해 세 마리의 개를 동시에 제어할 수 있으며, 001은 한 마리, 002는 두 마리, 003은 세 마리를 의미합니다.
2. 세 가지 기능: 소리 경고, 진동 경고, 정전기 경고;
3. 각 기능은 1-6단계로 조절할 수 있습니다;
4. 송신기와 수신기는 충전 가능하며, 수신기는 방수 기능이 있습니다;
5. 야간 안전을 위한 반사 및 형광 TPU

1. Light source : 16pcs+16pcs SMD 2835 LEDs
2. Battery: 3.2V / 5500mAh 32650 battery
3. Solar panel: 3.5W/5V
4. Luminous flux: 260LM x 2
5. Waterproof: IP65
6. Working mode: automatic charging during the day, lighting at night
7. Fully charged can lighting for 6-10 hours
8. Material: ABS+PC

1. 인체공학적 디자인으로 한 손으로 빠르고 쉽게 조절 가능하며 음정 변경의 어려움을 줄여줍니다
2. 나무 재질로 편안한 촉감을 제공합니다
3. 조작이 쉽습니다
4. 피크 중간 디자인은 인체공학적이며 연주 시 편안함을 제공합니다
5. 피크 크기: 30x25mm
6. 피크 전체 두께: 2.8mm, 끝부분 두께: 1.0mm

포장 구성:
카포 x 1
피크 x 2

1. Size: about 22.5x5.2 cm
2. Weight: about 280 grams
3. Material: stainless steel + acrylic
4. Scope of application: black pepper, white pepper, sea salt, and other solid particles (note: the coffee beans are relatively large and cannot be ground)
5. Features: humanized detachable body design, easy to clean the inside, adjustable thickness (rotating on the left to thicken, and turning on the right to thin), according to the actual situation, freely adjust the thickness of the powder, brushed stainless steel, has good corrosion resistance High resistance, heat resistance, toughness and texture, transparent and visible cup wall, made of transparent acrylic material, can clearly observe the grinding process, and grasp the amount of addition at any time

Name:Portable Washing Cup
Material:PC+ABS+PP
Application:Traveling
1. Two-piece set: Simple model, 2 cups
2. Size: 72mmX65mmX205mm
3. Leak-proof bayonet, one-piece molding
4. Thick material, partition storage
5. High temperature resistant cup, foldable tooth comb

1. Brand new and high quality
2. Easy to carry and use
3. Cable long length: 50cm, short length: 20cm
4. Compliant with USB specification 2.0
5. Available for USB port

1. USB 3.0 interface, compatible with USB 2.0 / 1.1.
2. Support SD / SDHC / SDXC MMC II / RS MMC card, Micro SD / Micro SDHC / Micro SDXC / TF card (not included).
3. No external power required.
4. LED light clew read and write state.
5. Plug-and-Play USB connectivity

1. Brand new and high quality
2. Easy to carry and use
3. Compliant with USB specification 2.0 & 3.0 & 1.1
4. Available for USB port

1. 2 in 1 HUB + card reader design.
2. USB 2.0 interface transmission speed up to 480Mbps.
3. Support read / write TF memory card (applicable to 1TB capacity) (not ncluded).
4. Applicable to MacBook and smartphone that support Type-C.
5. Support USB devices such as USB flash disk, USB mouse, USB keyboard and etc.
6. USB 2.0 / 3.1 Type-C port, compatible with all USB 1.1 and 2.0 devices.
7. Without driver, plug and play.
8. System supports Windows Server 2003 / 2008 / 2012, Windows 2000 / ME / XP / Vista / 7 / 8, Linux / Mac OS / Android.
9. Small size, convenient to carry.

1. Product material: alloy interface + nylon braid.
2. Wire length: 1m.
3. Output: 5V 2.4a [Max]
4. Equipped with 2 magnetic heads: iPhone 8pin / micro USB.
5. Product function: this charging line only supports charging and 360 degree blind absorption.
6. Anti breaking design: the product adopts hard metal braided thread head, high toughness and pull resistance.
7. Lighting: there is led blue light at the end of the charging line, which is convenient for night operation.
8. Product features: this charging line has strong magnetic force, blind absorption, automatic calibration and docking for charging, which greatly reduces the damage to the charging interface of the mobile phone due to the number of times. Magnetic field line once = traditional n times. The broadcasting head doesn't need to be pulled out. It can protect the mobile phone when the dust-proof plug is used. The mobile phone can be operated by one hand without the traditional method of holding the mobile phone in one hand and aiming at the charging hole. Let you enjoy pleasant mood and operation experience in driving and various occasions. It is equipped with two commonly used magnetic suction heads, which are widely used. It is suitable for charging all digital products such as apple, Huawei, Xiaomi, Samsung, oppo, etc.

1. Only support charging, support 360 degree blind suction
2. The product adopts hard metal braided wire end, high toughness, resistance to pulling, anti-breaking
3. There is LED blue light at the end of the charging cable, convenient for night operation
4. The magnetic plug does not need to be pulled out, it can act as a dust plug to protect the mobile phone
5. Wide range of use, suitable for charging all digital products with Micro USB and Type-C interface

Product parameters:
1. Product material: alloy interface + nylon braid
2. Cable length: 1 meter
3. Output: 5V 2.4A

Features:
1. The charger uses fireproof PC material, high temperature resistance, good quality
2. Multi-functional design, including a USB of QC 3.0 version, the charging range is wider
3. The total output current is 6A, which can intelligently charge electronic products quickly
4. Support four devices to charge at the same time
5. Applicable to all mobile phones, tablets, cameras, MP3, MP4, PSP and other digital products

Charger parameters:
1. Power: 30W
2. Input voltage: AC 100-240V; 50/60Hz
3. Total output: 6A
4. QC 3.0 interface output: DC 5V/3A; DC 9V/2.4A; DC 12V/1.5A
5. 3 USB 2.0 interface outputs: 5V 2.4A

Type-C data cable parameters:
1. Support 3A fast charge
2. Support 480Mbps data transmission

Features:
1. The charger uses fireproof PC material, high temperature resistance, good quality
2. Multi-functional design, including a USB of QC 3.0 version, the charging range is wider
3. The total output current is 6A, which can intelligently charge electronic products quickly
4. Support four devices to charge at the same time
5. Applicable to all mobile phones, tablets, cameras, MP3, MP4, PSP and other digital products

Charger parameters:
1. Power: 30W
2. Input voltage: AC 100-240V; 50/60Hz
3. Total output: 6A
4. QC 3.0 interface output: DC5V/3A; DC9V/2.4A; DC12V/1.5A
5. 3 USB 2.0 interface outputs: 5V 2.4A

Type-C data cable parameters:
1. Support 3A fast charge
2. Support 480Mbps data transmission

1. USB-C / Type-C to HDMI / VGA adapter small and convenient
2. Two sports are easy to use and support simultaneous output
3. The shell is made of aluminum material

1. 송신기 전력 소비: 약 10mW
2. 무선 거리: 개방 공간에서 약 300미터, 장애물이 있는 실내에서 약 20-50미터
3. 작동 온도: 섭씨 -20도에서 60도까지
4. 송신 주파수: 433.92MHz
5. 음량 범위: 25-85dB
6. 작동 습도: 80% 미만
7. 수신 주파수: 433.92MHz
8. 7가지 색상 조명, 38가지 벨소리
9. 버튼을 직접 붙일 수 있어 배선이 필요 없으며 설치가 쉽습니다

1. Lanyard: made of high-strength nylon fiber, durable and tensile strength, has a wide range of uses in a variety of outdoor activities
2. Dial: the panel is made of PVC, durable and clear printing, able to maintain stable performance in a variety of harsh environments
3. Shell: ABS material, lightweight, easy to carry and use, with good impact resistance and abrasion resistance
4. Whistle: made of ABS material, with higher durability, good sound conduction, clear and long-lasting sound quality
5. Comes with a compass to help quickly grasp the current direction
6. Compact size, does not take up space, portable to use
7. Hanging ring design, out of outdoor travel, adventure convenient to carry
8. Size: about 6.3 x 3 x 1cm
9. Weight: about 9g

Do you have trouble at that how to connect 2 sets stereophonic signal source and 8 sets output equipment?
Do you have trouble at that how to make 8 sets equipment output send sound at the same time after 2 sets equipment select shift output?
One strong stereophonic shift distribute device able to solve the problems that multiply equipment plug in and out,
1. 8 sets stereophonic output has independent switch, able to start at the same time, also able to be closed independently, start at the same time no consumption at the signal source tone quality and volume.
2. 2 sets input able to start at the same time and mix together to input, also able to close one set independently,
3. Able to solve the problem that able to distribute output 8 sets stereophonic after 1 set or 2 sets stereophonic mix input, output independent switch control,
4. Simple installation: input and output, able to be used once inserted, convenient to install, input and output signal no consumption, then can enjoy different hearing experience

Product Parameter
1. Material: Metal
2. Interface: RCA interface
3. Power supply: USB 5V supply power
4. Input and output impedance: 10K ohms - 50K ohms
5. Frequency responding: 20 - 20kHz.
6. Distortion: Less than 0.002%
7. Output consumption: Less than 0.01dB
8. Signal gain: 15dB
9. Signal-noise ratio S/N: Greater than 98dB
10. Input and output interface: Standard RCA interface
11. Input passageway quantity: 2 sets stereophonic shift input (2 sets input able to start at the same time and mix together to input, also able to close one set independently)
12. Output passageway quantity: 8 sets stereophonic shift input (able to start at the same time and close independently)
13. Control switch: Input and output adopt self lock switch, accurately select manually shift
14. Input shift passageway: 2 passageways
15. Output shift passageway: 8 passageways
16. Single product net weight: 0.45 kg
17. Product size: 167mm x 81mm x 38mm

Kit list
1. B062 2 in 8 out audio frequency signal select shift device x 1
2. USB power supply wire (wire length 100cm) x 1

1. Macro photography, 500X magnification, 2 megapixels meet your daily observation needs.
2. Adopt 2-inch IPS HD screen, with realistic color reproduction and clear observation effect.
3. Built-in 8pcs LED lights, providing additional lighting when used in dark spaces, easy to use.
4. Ergonomic design, comfortable grip, reducing hand fatigue during long-term use, its humanized design ensures a comfortable viewing experience.
5. Built-in 500mAh rechargeable battery, the device provides the convenience of long-lasting use, no need to frequently replace batteries, long service life.
6. Wide application: Circuit board repair, coin observation, madonry identification, plant observation, insect observation, etc.

Product parameters
Material: ABS
Size: 11.7x6.6x2.35cm
Screen: 2.0-inch IPS HD screen
CMOS: 2 million pixels
Photo pixels: 1920x1080P
Magnification: 500X
Focus mode: Fixed focus (0mm)
Image format: JPG
Video format: AVI
Light source: 8 LEDs
Battery capacity: 400mAh
Working time: 1.5 hours
Charging time: 1.5 hours
Charging interface: Type-C

1. Memory card: TF card
2. Shooting angle: 170 degrees
3. Photo format: JPEG
4. File format: MOV
5. Power interface: 5V 1.5-2A
6. Language: Support multiple languages
7. Data storage time: 128G storage for 7 hours (standard configuration without card)
8. Data transmission interface: AV
9. Installation location: front windshield
10. Main lens aperture: F2.0
11. Camera pixels: 12 million
12. Function: motion detection, loop recording, front and rear recording
13. Video resolution: 1080P
14. Transmission rate: C10
15. Memory capacity: 16MB
16. Screen size: 2.0 inches
17. Number of shots: three recordings before and after
18. Operation mode: button type
19. Equipped with a three-channel system, the camera provides a 170-degree front camera, a 110-degree cabin camera, and a 110-degree rear camera
20. Ultra-infrared night vision, thanks to 4 infrared LED lights, wide dynamic range (WDR) and high dynamic range (HDR) technology, the built-in camera provides clear footage and images at night
21. Loop recording of dual dashboard cameras front and interior with seamless loop recording will automatically overwrite the latest content
22. Emergency lock, when a vehicle collision is detected, the current video is locked and saved
23. Dimensions: 11.4x4.4 cm

1. Five-finger design, convenient, flexible and strong grip
2. Double-layer knitting, excellent heat insulation and heat dissipation
3. Double-sided dispensing, high-temperature environmentally friendly silicone, excellent anti-skid performance, beautiful appearance, easy to clean, can be used for positive and negative poles, extend the service life
4. The hook design is easy to hang, to avoid bacterial propagation
6. Can be cleaned to extend the life of the glove without reducing performance
7. Suitable for barbecue, oven, microwave oven, can also be used in industry

Features
1. Brand new and high quality.
2. High shock resistance.
3. Automatic sensor activates in darkness.
4. Bright 2 LED provide up to 6-9 hours on by 4-5 hours charge.
5. Solar panel absorbs sunlight into electrical energy stored in rechargeable battery.
6. Intelligent energy saving. No UV rays ,environment friendly, Waterproof, heatproof, durable.
7. The light is ideal for illuminating paths, decks, docks, boats, driveways, stairways, pavements.
8. It can be installed under the roof or fixed on the wall in your garden, gives you a good view and safety of your garden at night.
9. The independently operating lights have an average run time up to 8 hours depending on weather condition (no power cord is needed).
10. They have been specifically designed with road safety in mind and can help to prevent serious accidents and emit rather than reflect light.
11. It is cost effective, easy to install and require absolutely no wires or maintenance. Dramatically enhance the look of your garden and yard.
12. The solar powered wall light can be wall-mounted as well (all wall attachments and parts are included), which gives you flexibility for its placement in your garden.

Installation
1. Pull out the plastic strip left outside from the battery compartment cover.
2. This strip is the isolation for the battery.
3. Put back the battery compartment onto the light case.
4.Now drill two holes of 5mm diameter into wall. These 2 holes is 50mm horizontal distance. Then put the provided plastic stopple plug into the holes and screw in the bolts so far into the wall that the bolt head sticks out about 5-8mm.
5. Hang-up the solar light onto these bolts and make sure it is sit stably.