한 번의 클릭으로 100달러 상품 구매하기
월간 할인 및 특가
배송비 199원 균일 적용
한 번의 클릭으로 100달러 상품 구매하기
월간 할인 및 특가
배송비 199원 균일 적용
한 번의 클릭으로 100달러 상품 구매하기
월간 할인 및 특가
배송비 199원 균일 적용
한 번의 클릭으로 100달러 상품 구매하기
월간 할인 및 특가
배송비 199원 균일 적용
한 번의 클릭으로 100달러 상품 구매하기
월간 할인 및 특가
배송비 199원 균일 적용
한 번의 클릭으로 100달러 상품 구매하기
월간 할인 및 특가
배송비 199원 균일 적용
-
뷰티 & 헬스
-
스포츠 & 엔터테인먼트
-
장난감, 어린이 & 아기
서랍 메뉴
-
전자제품 및 액세서리
-
컴퓨터, 오피스 및 액세서리
-
홈 & 가든
-
뷰티 & 헬스
-
반려동물 용품
-
보안
-
자동차
-
패션
-
산업 및 과학
-
스포츠 & 엔터테인먼트
-
장난감, 어린이 & 아기
할인 중
당신만을 위한 블랙 프라이데이 특별 혜택!
모든 상품에 추가 15% 할인 혜택을 드립니다 — 오직 당신을 위해.
맥시마이즈비에프
당신만을 위한 블랙 프라이데이 특별 혜택!
위치 선택
-
에볼루션 본사
무료
보통 24시간 이내에 픽업할 수 있습니다
미국 뉴욕 NY 10011, 9번가 75번지
📞 (+1) 212-456-7890
🕐 월요일 – 금요일: 오전 8:30 – 오후 10:30
토요일: 오전 8:30 – 오후 10:30
일요일: 휴무 -
도심 지점
$5 당일 픽업
6시간 이내 준비 완료
미국 뉴욕 뉴욕시 브로드웨이 240번지, 우편번호 10007
📞 (+1) 212-987-6543
🕐 월요일 – 일요일: 오전 9시 – 오후 9시 -
퀸즈 서비스 센터
무료
다음 영업일 준비 완료
89-10 퀸스 블러바드, 엘름허스트, 뉴욕 11373, 미국
📞 (+1) 917-555-3344
🕐 월요일 – 금요일: 오전 9시 – 오후 8시
토요일: 오전 10시 – 오후 6시
일요일: 휴무
부제목
제품 비교
제품 비교 표를 설명하세요
|
__ __ |
|
|---|---|
| 설명 |
설명 - __ |
| 평점 |
평점 - __ |
| 판매자 |
판매자 - __ |
| 색상 |
색상 - __ |
|
|
제품 비교 ( / )
25001개 제품
25001개 제품
정렬 기준:
- 추천
- 가장 관련성 높음
- 베스트셀러
- 알파벳순, A-Z
- 알파벳순, Z-A
- 가격(낮은 가격부터)
- 가격(높은 가격부터)
- 날짜(오래된 날짜부터)
- 날짜(최신 날짜부터)
₩9,000 KRW
2. Size: 95x85x34mm
3. Light source power: 20W
4. Voltage: 12V
5. Current: 0.3A
6. Luminous flux: 1000lm
7. Color temperature: 6500K
8. Service life: 50000 hours
9. There are multiple modes of lighting:
- Driving mode: pilot light flashes for about two seconds
- Braking mode: always on after flashing four times
10. Non-destructive installation, with screws on the back, not easy to fall
11. After installation, this product can increase the warning function, which is conducive to driving safety
| Package Weight |
|
Receives in 7 days.
₩4,000 KRW
2. Life rain-proof design, can be used outdoors on rainy days, easy to install and use, the function is very practical.
3. Mounting ring suitable for 28-30MM diameter handhandle mounting.
4. Material:ABS.
5. Power supply: two AA batteries(Not included).
| Package Weight |
|
Receives in 7 days.
₩5,000 KRW
1. Material: aluminum alloy
2. Scope of application: bicycles, motorcycles, electric bicycles, etc.
3. Clamp: suitable for round pipe diameter of about 18-35mm
4. Weight: about 180 grams
5. Size: about 14x6.5cm
Features:
1. Aluminum alloy material, strong and durable, good toughness, light and portable, not easy to deform
2. Sleek bayonet, does not hurt the water cup
3. 4-point support, safe and stable, not easy to fall
4. The base can be rotated, and the horizontal and vertical pipes can be installed
5. The surface is treated with baking paint, which is durable and does not fade, corrosion resistance and high temperature resistance, and is not easy to scratch.
6. The base and bottle cage are detachable
| Package Weight |
|
Receives in 7 days.
₩6,000 KRW
1. Material: ABS+PVC+iron+zinc alloy
2. Suitable for: bicycle / electrical car / motorcycle
3. Thickened steel cable, strong and durable, using high-strength composite steel wire winding and anti-violence unlocking
4. PVC shell is soft and anti-freezing, longer service life
5. No need for keys, more difficult to crack the combination of passwords, high security coefficient
6. Compact and portable, does not take up space, can be hung on the frame to ride easily
7. The same lock can be combined with each other, do not have to worry about not long enough
8. Waterproof, not easy to rust
9. Length: 40cm/57cm
10. Weight: 251g/310g
| Package Weight |
|
Receives in 7 days.
₩5,000 KRW
1. Hidden silicone strap design, fully wrapped to protect the phone, stable and anti-shake, safe riding, easy to handle various road conditions
2. Does not block the screen, does not block the buttons, reserved charging port
3. One-handed operation, 1 second to take and put, press the two sides of the telescopic block inward to release automatically, put the phone and touch the back panel to lock the phone automatically
4. 360-degree adjustment at any angle to find the viewing angle you are used to
5. Thickened soft silicone protective pad, evenly clamped at the four corners, fully protects the phone
6. Suitable for handlebars with a 16-29mm diameter, and rearview mirrors with an aperture of less than 10mm. Widely applicable to various models, such as bicycles, motorcycles, scooters, electric bicycles, etc.
7. Material: ABS, silicone
8. Clamp range: 61-90mm, suitable for 4.5-7-inch mobile phones, with a wide range of compatibility
| Package Weight |
|
Receives in 7 days.
₩4,000 KRW
2. Made of strong and durable stainless steel.
3. Compact portable design.
4. Material: stainless steel
5. Size: 11.50 x 10.00 x 2.00cm
| Package Weight |
|
Receives in 7 days.
₩45,000 KRW
1. Multi-functional compatibility: this bicycle/motorcycle water bottle holder is suitable for various vehicles, including bicycles, electric bicycles, motorcycles, scooters and baby strollers
2. Strong and safe: it features a design to prevent loosening, ensuring that the water bottle is securely and safely fixed during riding
3. Adjustable width: this water bottle holder has a 53 - 90 mm adjustable clamping width, which can adapt to various cup sizes and securely and stably hold the water bottle
4. Easy installation: it uses sturdy and safe clamps. This water bottle holder can be easily installed on the handlebars or other suitable positions by quickly releasing the base, and can be easily disassembled and installed when needed
5. 360-degree rotation: with a 360-degree rotation design, this water bottle holder can be easily adjusted to a comfortable angle, allowing the rider to conveniently access the drink without affecting the riding experience
6. 5-color lighting design, with colors including red, blue, green, orange, and white. The colors cycle in a sequence
7. Power supply method: 2 CR2032 button batteries are connected in series for power supply
8. Note: only the support is included, no other items
| Package Weight |
|
Receives in 7 days.
₩6,000 KRW
1. Material: high tensile silicone + ABS
2. Battery: CR2032 x 2
3. Battery life: 80-100 hours
4. Bring you visibility and provide additional safety protection in bad weather
5. Especially lightweight structure, convenient design makes you feel comfortable
6. Three gear modes, constant light, fast flash and slow flash are available
7. Fixed lock design, not easy to fall off, quick disassembly and assembly
8. Waterproof and easy to install
9. Size: 11x3.5x2cm
10. Weight: 30g
| Package Weight |
|
Receives in 7 days.
₩13,000 KRW
1. Material: plastic
2. Compatible cell phone size: 5.5-6.9 inch
3. Handlebar model: handlebar models: suitable for handlebar with a caliber of 18-23mm; rearview mirror model: suitable for screws with a caliber of 8.5mm or less
4. Transparent window, does not block the camera
5. Internal magnetic resilient base, firmly hold the cell phone
6. Separate design, the phone box can be taken away with the phone, more convenient to use
7. Reserved charging port, convenient for charging at any time
8. 360-degree rotating gimbal design, horizontal and vertical screen can be used, adjust the angle of the appropriate
9. ABS plastic material, strong and not broken
Note: delivery only bracket, does not contain other items
| Package Weight |
|
Receives in 7 days.
1. Brand new and high quality
2. Can securely attach your Video Camcorder to Bicycle handlebars and other outdoor gear, so you can record all the action while keeping your hands free
3. A good assistant for cyclists, bikers to record on-the-go action
4. Convenient and reliable to use.
5. Easy to install
| General |
|
| Package Weight |
|
Receives in 7 days.
₩3,000 KRW
1. Brand new and high quality
2. Can securely attach your Video Camcorder to Bicycle handlebars and other outdoor gear, so you can record all the action while keeping your hands free
3. A good assistant for cyclists, bikers to record on-the-go action
4. Convenient and reliable to use.
5. Easy to install
| General |
|
| Package Weight |
|
Receives in 7 days.
1. 새 제품이며 고품질입니다
2. 비디오 캠코더를 자전거 핸들바나 기타 야외 장비에 안전하게 부착할 수 있어, 손을 자유롭게 하면서 모든 액션을 기록할 수 있습니다.
3. 자전거 타는 사람과 바이커를 위한 좋은 동반자, 이동 중 액션을 기록할 수 있습니다.
4. 편리하고 신뢰할 수 있는 사용법.
5. 설치가 쉽습니다
| 일반 |
|
| 포장 무게 |
|
Receives in 7 days.
₩7,000 KRW
2. All weather protection for your Mobile Phone. The Tough Case incorporates a strong durable weatherproof case for the Mobile Phone
3. Designed to IPX4, this all weather case will keep your Mobile Phone secure and dry in most riding conditions. This solid, robust case has been designed to withstand daily use and will protect against wet / damp weather.
4. Your Mobile Phone 4 is accessed through the front, touch sensitive lens while remaining protected within the Tough Case.
5. This lens has been made for todaya??s technology. The view remains clear and the sensitivity remains very responsive.
6. The Tough Case is supplied with a STANDARD hinged bike handle bar mount suitable for handlebars with a diameter between 21mm - 30mm. Simple one screw fixing makes fitting quick and easy.
7. The handlebar casing is lined to protect bars and reduce vibration. This casing is in two parts and is removable if required.
8. Press button release means the case to be completely removed from the handlebar mount at the touch of a button, a great security feature.
9. Fully adjustable - The TOUGH CASE can be turned 360 degrees allowing you to view your Mobile Phone horizontally or vertically, ideal for satnav & map applications the mount can also be tilted for video use while riding.
10. No tools required to fit.
11. Waterproof IPX4 Tested - suitable for general use in most weather conditions.
12. The Tough Case performed well in wet weather conditions providing reliable protection against rain, snow & damp air.
NOTE: Do not submerge case or use underwater
| General |
|
| Package Weight |
|
Receives in 7 days.
₩9,000 KRW
1. Material: ABS
2. Applicable: adjustable width, most equipment, easy to install and use
3. 360-degree adjustable rotation, multi-directional visual viewing
4. Compatible with 4.5-12.9-inch mobile phones/tablets
5. Strong support, adjust the angle at will
6. Use high-quality soft rubber foot pads to prevent installation from scratching objects and increasing friction.
7. The installation diameter is 15-50 mm, and the locking is not loose.
8. Weight: 242 grams
| Package Weight |
|
Receives in 7 days.
₩7,000 KRW
1. Material: aluminum alloy
2. Applicable: Presta and Schrader valves
3. Applicable scenes: bicycle, ball inflatable, etc
4. Lightweight design, travel more convenient, riding without burden
5. Configuration of the car rack, easy to install in the car, does not take up space
6. Aluminum alloy cylinder body, not easy to damage deformation, solid and durable
7. The gas pipe is made of anti-freezing material, heat-resistant, cold-resistant and corrosion-resistant
8. Size: 19.5 x 3cm
9. Weight: 90g
| Package Weight |
|
Receives in 7 days.
₩10,000 KRW
1. Name: Bicycle headlight
2. Color: Black shell
3. Light source: CREE XPE 3W LED (300 lumens)
4. Material: PC lampshade + ABS lamp housing;
5. Function: Highlight-low-blink-off;
6. Battery: Built-in rechargeable lithium-ion polymer battery (800mAH, 3.7V)
7. Weight: Net weight: about 40g, gross weight: about 70g
8. Size: Length 65 × width 28 × height 23mm;
9. Application: Handlebar diameter: 20-40mm
10. Features: This product is novel in shape, small and exquisite, and has super practicality, which shows the fashion trend and technological atmosphere.
11. Use high-power high-brightness CREE 3W LED (320 lumens) as the light source, coupled with transparent front + side frosted acrylic lampshade to enhance light, and the brightness is more than 5 times brighter than ordinary LED lights;
12. V-shaped galvanized reflector is used to form a diffused spot, with a wide range of light exposure, 30-50 meters at night, and a wide passive viewing angle of 220 °, which fully guarantees your riding safety; due to the openings on both sides of the reflector , The light can leak from the side, illuminating the entire crystal head, it is beautiful and eye-catching;
13. Super waterproof, the keys are covered with expanded rubber, and the USB charging interface is sealed with a silicone dust cover, making it safe to ride on rainy days;
14. USB interface charging, using lithium-ion polymer battery (800mAH, 3.7V), can be reciprocated charging and discharging, fast charging speed, long discharge time, generally charging 3-4 hours, discharge time: 3h highlight, 5h low, Flashing 12h.
15. Quick release design, the whole installation process is operated by hand, without tools, wrist-type silicone belt buckle design, adjustable length, suitable for various thickness handlebars (about 1-4CM)
16. Professional 360 ° rotatable base design, the irradiation direction can be adjusted at will, which greatly increases the irradiation range of the lamp
| Package Weight |
|
Receives in 7 days.
₩10,000 KRW
1. Waterproof and dustproof: fully sealed, with hook and loop fastener closure at the bottom, dustproof and waterproof, no fear of bad weather.
2. Transparent back cover, does not block the camera
3. High-definition transparent large-size transparent window, does not affect touch control
4. The bracket fixing position adopts a mechanical quick-release design, which can be firmly locked on the car and will not easily loosen and fall
5. 360-degree free rotation and adjustment to find a safe angle suitable for your riding
6. Two installation methods, both rearview mirror installation and handlebar installation
7. Size L is suitable for mobile phones below 6.1 inches, and XL is suitable for mobile phones below 7.2 inches
8. Material: PU, PVC, nylon fiber, metal, silicone
| Package Weight |
|
Receives in 7 days.
₩11,000 KRW부터
Front Light Features:
1. Strong battery life, bright LED lamp beads, aluminum alloy material, waterproof, memory mode, anti-glare light
2. The large wide-angle floodlight design greatly widens the lighting angle, and there is no dead angle in the front wheel area. You can see clearly from riding corners to street corners
3. Anti-glare design, aluminum alloy cover design, prevent light reflection from irritating rider eyes
4. The shell is made of aluminum alloy, which is strong and resistant to falling, high and low temperature, and can be used normally even if it is exposed to the sun for a long time
5. Five-level lighting, one-button switching, high-efficiency circuit, long-lasting battery life
Tail Light Features:
1. 16 SMD red LEDs, warning lighting at night
2. 180-degree wide-angle irradiation surface, 4 red warning lights on the left and right sides, allowing the light source to emit from both sides of the housing, realizing a 180-degree wide-range warning, reminding you to avoid vehicles coming from the side
3. 6 levels of lighting, one-button switching, to meet the needs of different riding scenes
4. IPX6 protection, not afraid of wind and rain, completely prevent dust and mud from entering, effectively resist heavy rain or strong water splashing, and still work normally
5. Easy to install and remove, the silicone can stretch 95-160mm in length, and only one silicone strap can fix the bicycle light
Parameter
1. Bulb type: Front light: 2 x XPG2 lamp beads; Tail light: 16 SMD red LEDs
2. Irradiation distance: 100-200 meters
3. Lumens: 300 lumens
4. Charge and discharge protection: built-in overcharge and overdischarge IC to prolong battery life
5. Charging interface type: TYPE-C/USB-C USB charging port
6. Charging indication: the red indicator light flashes slowly when charging; the red indicator light is always on when fully charged
7. Front light mode: high-medium-low-SOS-warning flash
8. Tail light mode: high-medium-low-slow flash-fast flash-marquee
9. Switch: Click to open, click the gear cycle, press and hold for 2 seconds to shut down, and turn off the mode after turning on the memory
10. Charging voltage: 5V/1A
11. Barrel material: aluminum alloy (wear-resistant anodized)
12. Charging time: 2-3 hours
13. Battery life: 2.5-15 hours for front lights; 5-42 hours for tail lights
14. Power supply mode: front light: built-in 500-capacity polymer battery, tail light: built-in 500-capacity polymer battery
15. Switch type: lamp head push switch
16. Waterproof grade: IPX6
17. Packing list: host + USB cable + silicone strap + manual + packing box
18. Size: 4.3 x 2.4 x 2.8cm
19. Net weight: 36g
| Package Weight |
|
Receives in 7 days.
₩5,000 KRW
1. Metal bell, durable and pleasant ringing
2. Easy to install, can be installed in the locator
3. Prevent bicycle loss
4. Bicycle crossbar can be installed on the left or right without restriction
5. Size: 47.8x72x27.7mm
6. Weight: about 45 grams
| Package Weight |
|
Receives in 7 days.
₩6,000 KRW부터
Three-in-one combination tool:
1. Environmentally friendly plastic, good slip resistance
2. One-piece milling pin forming, high strength
3. Function: install/remove the hollow crankshaft; install/remove the dead flywheel locking ring; fix the flywheel for easy removal of the flywheel
4. Material: carbon steel + surface chrome plating
5. Size: length 20cm
6. Weight: about 200g
Pull code tool:
1. The ejector rod has an extended and removable square mouth
2. Precise thread, thick head, CNC thread, high coaxiality, precision without deflection, not easy to screw the crank thread, easier to push in and remove the crank
3. The diameter of the head is increased to 9.5mm, which is not easy to be bald and does not hurt the central axis
4. Anti-slip embossing, easy to screw by hand, easy to adjust
5. The occlusal mouth is lengthened, the force area is large, and it is not easy to twist and slip
6. Anti-rust and non-slip surface, no matter how hard it is, it will not slip off, so you can rest assured
7. Material: high strength steel
8. Size: length 8cm, diameter 1.9cm
9. Weight: about 120g
Silver chain clipper:
1 Applicable to all kinds of chains, the chain will be better restored to the original precision and smooth rotation after installation
2. Effectively avoid ejection, the ejector needles make concentric and concentric movements
3. Make the thimble accurately align the chain shaft to ensure chain cutting efficiency
4. Using the new quenching and heat treatment technology, the hardness is effectively improved and the service life is prolonged
5. Using automatic thread rolling machine, high precision push thread, accurate push
6. Material: high strength steel
7. Size: 8.2x7x1.1cm
8. Weight: about 120g
Spoke wrench
1.8-mouth precision crafted, steel-printed numbers, suitable for common spoke nipples on the market
2. Use the corresponding bayonet to clamp the spoke cap and turn it to adjust
3. High-strength forging, heat-treated and hardened, suitable for 10-15G spoke nipples
4. The operation does not hurt the hand, no burr, and no damage to the spoke nipple
5. The corners are rounded, the surface is smooth, the operation is simple, and it can be done with one hand
6. Material: high strength steel
7. Size: 3.8x3.8x1.7cm
8. Weight: about 46g
Universal tool for flywheel:
1. With the use of a chain wrench, the flywheel can be easily removed
2. It is used to disassemble and assemble the flywheel, suitable for both flywheel and spin fly, thin-walled
3. Material: carbon steel
4. Size: height 2.6cm, diameter 2.5cm
5. Weight: about 33g
Bottom axle removal sleeve:
1. High-precision 20-tooth straight square teeth, precise insertion into the keyway, uniform force, continuous teeth, no damage to the keyway
2. Anti-dropping design, easy to solve the problem that the cylinder cant be fixed and easy to fall off without exerting force
3. 20 sturdy teeth, which can fit and exert force at the same time
4. Satisfy the daily vehicle disassembly, maintenance and durability of riders
5. Material: high strength steel
6. Size: 3.2x3.25cm
7. Weight: about 108g
Tire lever:
1. Material: high strength steel + plastic handle
2. Size: length 15cm
3. Weight: about 120g
Freewheel chain wrench:
1. High-strength steel forged, heat-treated and hardened, comfortable grip, hardened chain
2. Material: high strength
3. Size: length 30cm
7. Weight: about 260g
Chain clipper:
1. Material: high strength steel + plastic handle
2. Dimensions: 10.5 x 7 x 2cm
3. Weight: about 200g
| Package Weight |
|
Receives in 7 days.
₩7,000 KRW
1. Weight: 228 grams for handlebars and 201 grams for rearview mirrors
2. Dimensions: length 80 mm, width 65 mm, can be extended to 105 mm
3. Material: aluminum alloy
4. Applicable mobile phones: 5.5-10.5 cm wide mobile phones (4.5-6.8 inches)
5. Applicable models: handlebar diameter is less than 30 mm, rearview mirror aperture is less than 10 mm
6. Features: beautiful and practical, waterproof and rainproof, frosted technology, tilt angle adjustable by 180 degrees, with shock-absorbing gasket, no damage to the phone, reinforced base, stable and anti-shake, simple and convenient installation, strong and durable
| Package Weight |
|
Receives in 7 days.
₩4,000 KRW
1. No fear of storms, fully enclosed waterproof phone holder
2. Universal for motorcycles, electric vehicles and bicycles
3. With shell control, three-point adjustment, universal adjustment, tool-free installation
4. Magnetic base, compatible with multiple sizes
5. Three-axis adjustment, free height adjustment, flexible use
6. Humanized design, reserved holes, charging / listening to songs are correct
7. Side buckle fixing design, flexible universal adjustment wheel, transparent rear
8. Applicable mobile phone size: 4-6.5 inches
9. Waterproof grade: IPX6
10. Material: ABS+PVC+Nylon
11. Cover product accessories: hexagon wrench, iron sheet
12. Size: about 19x10cm
13. Weight: about 350g
14. Note: The product only includes brackets, not including mobile phones and other
| Package Weight |
|
Receives in 7 days.
₩3,000 KRW
1. Suitable for: smaller than diameter 3cm tube
2. Easy set up and requires no tools
3. Convenient, reliable and easy to use
4. Strong and stable bike mount
5. Designed to lock your camera securely on your handlebar with rock solid reliability.
6. Capture point-of-view perspective from vehicle; Great way to take shots of yourself or of people following you
| General |
|
| Package Weight |
|
Receives in 7 days.
₩11,000 KRW
1. Super strong buffer shock absorption cycling mobile phone holder, no shaking when riding, no fear of mountain off-road, easy to handle various road conditions
2. Freely adjust the angle, and support multiple angles to install for a better riding experience
3. Automatic alignment and locking when put down, one-click to remove the mobile phone, quick disassembly, and easy operation
4. Support 14-45mm diameter handlebars, widely used in various models, such as bicycles, motorcycles, scooters, treadmills, baby carriages, etc.
5. Material: PC, ABS, nylon fiber, silicone, aluminum alloy
6. Suitable for 4.5-7 inch mobile phones, with a wide range of compatibility
| Package Weight |
|
Receives in 7 days.
₩9,000 KRW
1. Magnetic cycling phone holder, super strong cushioning and shock absorption, no shaking when riding, no fear of mountain off-road, easy to handle various road conditions
2. Freely adjust the angle, and support multiple angles for installation to get a better riding experience
3. Stick the magnetic ring patch in the package on the mobile phone case and snap it into the holder. The holder has an automatic mechanical snap lock for easy disassembly and assembly. (Please do not stick the magnetic ring patch directly on the mobile phone but on the flat/hard shell)
4. Support 14-45mm diameter handlebars, widely applicable to various models, such as bicycles, motorcycles, scooters, treadmills, strollers, etc.
5. Material: PC, ABS, nylon fiber, silicone, aluminum alloy
6. Size: 67 x 112 x 80mm
7. Note: The holder has no magnetic function, only the patch has a magnetic ring.
| Package Weight |
|
Receives in 7 days.
1. 재질: 알루미늄 합금
2. 크기: 길이는 최대 40cm까지 늘릴 수 있고, 짧게는 35cm까지 줄일 수 있습니다
3. 무게: 약 310그램
4. 색상: 검정색
5. 발받침 길이는 빠르게 조절할 수 있으며, 내마모성, 미끄럼 방지, 내식성이 있어 주차 시 더욱 안정적입니다.
6. 표면 처리가 매끄럽고, 재질은 고급 알루미늄으로 제작되었으며, 고정 나사는 모두 경도금 스테인리스 나사이고, 프레임 고정 위치에는 마모 방지 플라스틱 가죽이 제공되어 차량에 흠집이 생기지 않습니다.
| 포장 무게 |
|
Receives in 7 days.
1. Made of environmentally friendly plastic material, the remote control with screen can be installed on the handlebar of the bicycle
2. Support 20-24mm diameter bicycle handlebars
3. Thicker material, more durable
4. Compatible models: suitable for DJI Mini 3 Pro remote control with screen
5. Weight: 42g
6. Product size: 13 x 7 x 3cm
7. Note: Only the fixing bracket is included, no other
| General |
|
| Package Weight |
|
Receives in 7 days.
1. This bracket is 3D printed and made of environmentally friendly plastic material
2. After use, the remote control can be installed on the handlebar of the bicycle for better shooting
3. Support 20-24mm diameter bicycle handlebars.
4. Compatible models: suitable for DJI Mini 3 Pro/Mavic 2/Mavic Air 2/ Air 2s with screen remote control
5. Note: only the fixing bracket is included, no other
| General |
|
| Package Weight |
|
Receives in 7 days.
₩4,000 KRW
1. Material: PV polycarbonate
2. Dimensions: Mountain bike model: 7.5 x 8 cm, road bike model 4 x 4 cm
3. Weight: 89 grams for mountain bikes, 17 grams for road bikes
4. Using high-strength PC plastic, rigid and tough, beautiful, safe, free to use your creativity, fancy parking anytime, anywhere
5. The package contains: parking buckle, expansion screw, screw
| Package Weight |
|
Receives in 7 days.
₩39,000 KRW
2.Wire Diameter:10mm.
3.Alarm sound is louder than 110 decibels.
4.Power: 3 * AAA batteries.
5.High quality , easy to use.
| General |
|
| Product Parameter |
|
| Package Weight |
|
Receives in 7 days.
8490/25001개 표시
관련 컬렉션 살펴보기
컬렉션 설명
- 선택 시 전체 페이지가 새로 고침됩니다.
- 새 창에서 열립니다.